Seamless solid color epoxy floor with a high-gloss topcoat, installed by Santa Monica Epoxy Flooring in Santa Monica, CA 90404

Santa Monica, CA · New shop on Stanford St

Residential Epoxy Flooring Santa Monica

Garages are the start. Home gyms, studios, ADUs and laundry rooms are where solid color and metallic epoxy come in.

📍 1653 Stanford St #1, Santa Monica, CA 90404Get directions

Get My Free Estimate Call (310) 853-8972

Free On-Site Estimate

Residential Epoxy: Quick Answer

Residential epoxy in Santa Monica costs $6.50–$10 per sq ft for flake, $9.50–$11.50 for solid color and $12.50–$18.50 for metallic. Interior floors take 2–4 days.

Many Santa Monica homes have small footprints, so the garage often becomes a gym, office or ADU. A solid color epoxy in gray or warm white with a satin topcoat looks finished and is easy to clean. Add grit for gyms. For a laundry room or mudroom, flake is the practical pick.

2026 installed prices

Price

Installed prices for 2026. Two-car garage = up to 400 sq ft. Every project starts at $2,600. Extra prep is priced after a free on-site look.
System	Per sq ft	Two-car garage	Time on site
Flake epoxy (garage standard)	$6.50–$10	$2,600–$4,000	1 day
Solid color epoxy	$9.50–$11.50	$3,800–$4,600	3 days
Metallic epoxy	$12.50–$18.50	$5,000–$7,400	3–4 days

What Can Raise or Lower Your Quote

Prep: the other half of the price

The system sets the per-foot range; the slab decides where you land in it. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.

Grinding off an old coating, sealer or paint
Removing carpet glue, tile mastic or mat adhesive
Advanced crack and spall repair
Demolishing an existing floor before coating
Moisture mitigation on a slab that reads damp
Extra labor for tight access, oil-soaked concrete or heavy cleanup

How It Goes In

Moisture test and walk-through: we read the slab and mark cracks before anything starts.
Diamond grinding: opens the concrete so the coating can bite. No acid etching.
Dust control: HEPA vacuums pull the grinding dust as we go.
Repairs: cracks, pits and spalls filled and ground flush.
Basecoat: moisture-tolerant epoxy or pigmented polyaspartic, picked for your slab.
Broadcast: flake or quartz thrown until the basecoat is covered, or a metallic pour.
Scrape and vacuum: loose chips come off so the surface is even.
Topcoat: clear polyaspartic rated for hot tires and sun.

Our work

Recent Residential Epoxy Projects

Hand-poured metallic epoxy floor with a marble-look swirl, installed by Santa Monica Epoxy Flooring in Santa Monica, CA 90404

Full-broadcast flake epoxy floor with a clear polyaspartic topcoat, installed by Santa Monica Epoxy Flooring in Santa Monica, CA 90404

Residential Epoxy FAQ

Can you epoxy a garage I am turning into an ADU?

Yes. We coat after drywall and paint. Solid color or metallic are common in living space.

Is epoxy good for a home gym?

Yes. Solid color with grit holds up under mats and weights.

Does solid color show dust?

More than flake. Mid-grays hide it best.

What prep work can add to an epoxy floor quote?

Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.