Epoxy flooring in Mar Vista costs $6.50–$10 per sq ft for a flake garage floor, which is $2,600–$4,000 for a two-car garage. Garage-to-ADU conversions usually get solid color or metallic, from $9.50 per sq ft.
Mar Vista is about three miles southeast of our shop, so it is one of our quickest drives. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 10 minutes. Call (310) 853-8972 for a free on-site estimate.
| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Mar Vista has a lot of garage-to-ADU conversions and backyard workshops. A converted garage often has a slab that slopes to the door, which is fine for parking but noticeable in a living space. We discuss that before coating.
The Mid-Century Tract homes draw owners who care about finishes. Solid gray or a satin metallic suits those houses better than a busy flake.
See more: Grind & seal ›Workshop or parking: standard flake. ADU or studio: solid satin epoxy or metallic.
Most Mar Vista jobs are a single day on site for flake and three days for solid or metallic.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
Workshop or parking: standard flake. ADU or studio: solid satin epoxy or metallic.
A flake epoxy garage floor in Mar Vista costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Mar Vista, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Mar Vista Hill | 90066 | Post-war homes with detached garages |
| Westdale | 90066 | Ranch homes, two-car garages |
| Mar Vista Gardens area | 90066 | Smaller homes and workshops |
| Mar Vista Tract (Eames homes) | 90066 | Mid-century modern homes, careful finish choices |
| Grand View / Venice Blvd | 90066 | Small businesses and studios |
Plus every other street in 90066. No travel charge.
Epoxy flooring in Mar Vista costs $6.50–$10 per sq ft for a flake garage floor, which is $2,600–$4,000 for a two-car garage. Garage-to-ADU conversions usually get solid color or metallic, from $9.50 per sq ft.
Yes. We usually coat after drywall and paint are done. Solid color and metallic are the common picks for living space, priced per square foot.
Yes. Sawdust sweeps right off, and the flake hides small dents from dropped tools.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
