In Beverly Hills, flake epoxy garage floors cost $6.50–$10 per sq ft ($2,600–$4,000 for two cars) and metallic epoxy runs $12.50–$18.50 per sq ft. Larger collector garages and finished rooms are priced per square foot after we measure and test the slab.
We drive into Beverly Hills from Santa Monica in about twenty minutes and work all three zip codes. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 20–25 minutes via Olympic or Santa Monica Blvd. Call (310) 853-8972 for a free on-site estimate.
Show garages are common here, and the floor is half the look. Metallic and high-gloss flake are the usual picks, and the prep matters more on a mirror finish because every flaw shows.
Many Flats homes have a garage floor that has already been coated or tiled. Taking that up is a separate line on the quote, and it is the main reason Beverly Hills jobs run toward the top of the range.
See more: Metallic epoxy ›Collector garage: metallic in gray or charcoal, or a 4-layer flake with urethane gloss. Working garage: standard flake in a mid-gray.
A flake epoxy garage floor in Beverly Hills costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Beverly Hills, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
| Neighborhood | Zip | What we usually find |
|---|---|---|
| The Flats | 90210 | Large homes, multi-car garages, often old tile or epoxy |
| Trousdale Estates | 90210 | Mid-century homes with show garages |
| South of Wilshire | 90211, 90212 | Duplexes and smaller homes with alley garages |
| Beverly Hills Post Office | 90210 | Hillside estates, gate and staff coordination |
| Beverly Crest | 90210 | Steep lots; gear carried in by hand |
Plus every other street in 90210, 90211, 90212. No travel charge.
Collector garage: metallic in gray or charcoal, or a 4-layer flake with urethane gloss. Working garage: standard flake in a mid-gray.
We work around staff, deliveries and gate schedules, and can split prep and coating across two days for very large garages.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
In Beverly Hills, flake epoxy garage floors cost $6.50–$10 per sq ft ($2,600–$4,000 for two cars) and metallic epoxy runs $12.50–$18.50 per sq ft. Larger collector garages and finished rooms are priced per square foot after we measure and test the slab.
Yes. Metallic is popular in show garages here. It takes 3–4 days because each layer needs to cure, and it costs $12.50–$18.50 per sq ft.
Yes. Alley garages in 90211 and 90212 are usually one or two cars and fit the standard one-day flake install.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
