A flake epoxy garage floor in Redondo Beach costs $6.50–$10 per sq ft, or $2,600–$4,000 for two cars. Patio and balcony coatings use polyaspartic at $8–$12 per sq ft so they do not yellow in sun.
Redondo is one of the farther South Bay stops for us, about thirteen miles from Stanford Street. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 30–35 minutes. Call (310) 853-8972 for a free on-site estimate.
North Redondo garage: standard flake. South Redondo townhome: flake plus a polyaspartic patio.
A flake epoxy garage floor in Redondo Beach costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Redondo Beach, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
North Redondo is mostly tract homes from the 1950s–70s with attached two-car garages. Those slabs are older but usually solid, with some cracks and oil stains.
In South Redondo there are many two-on-a-lot townhomes with small garages and second-floor decks. Owners often add the patio or deck to the same project.
See more: Grind & seal ›| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
| Neighborhood | Zip | What we usually find |
|---|---|---|
| South Redondo / Riviera Village | 90277 | Older homes and townhomes near the beach |
| North Redondo | 90278 | Tract homes with two-car garages |
| Golden Hills | 90277 | Larger homes on slopes |
| King Harbor area | 90277 | Condos and commercial |
Plus every other street in 90277, 90278. No travel charge.
North Redondo garage: standard flake. South Redondo townhome: flake plus a polyaspartic patio.
Two-part jobs (garage and patio) usually take two days so each area cures properly.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
A flake epoxy garage floor in Redondo Beach costs $6.50–$10 per sq ft, or $2,600–$4,000 for two cars. Patio and balcony coatings use polyaspartic at $8–$12 per sq ft so they do not yellow in sun.
Yes. We usually do the garage on day one and the patio on day two, so you are never without both.
We degrease and grind oil-soaked areas. Very deep oil may need extra treatment, which we price as prep.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
