A flake epoxy garage floor in Sherman Oaks costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage. Valley summers are hot, so every floor gets a polyaspartic topcoat rated for hot tires. Most installs take one day.
Sherman Oaks is over the 405 from us, about twelve miles; we schedule Valley jobs early to beat traffic. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 25–35 minutes over the 405. Call (310) 853-8972 for a free on-site estimate.
Valley garages get hot, often well above the outdoor temperature by afternoon. Hot tires coming in off the freeway can lift a cheap coating. A polyaspartic topcoat is what prevents hot-tire pickup.
Hillside homes south of Ventura often have steep driveways and garages under the house, sometimes with water coming in at the door. We look at drainage before coating.
See more: Grind & seal ›| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Standard 3- or 4-layer flake with a polyaspartic top. Gyms on Ventura: solid satin with grit.
A flake epoxy garage floor in Sherman Oaks costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Sherman Oaks, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| South of the Boulevard | 91403 | Hillside homes, larger garages |
| Chandler Estates | 91423 | Ranch homes with two-car garages |
| Longridge Estates | 91423 | Mid-century homes |
| Ventura Blvd corridor | 91403, 91423 | Shops, salons and gyms |
Plus every other street in 91403, 91423. No travel charge.
Standard 3- or 4-layer flake with a polyaspartic top. Gyms on Ventura: solid satin with grit.
In summer we start early so the coating goes down before the garage heats up.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
A flake epoxy garage floor in Sherman Oaks costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage. Valley summers are hot, so every floor gets a polyaspartic topcoat rated for hot tires. Most installs take one day.
Hot tires soften cheap coatings and pull them off the floor when the car leaves. A polyaspartic topcoat over a properly ground slab prevents it.
Yes. Heat speeds up cure. We start early and adjust products so the coating levels properly.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
