Now open: 1653 Stanford St #1, Santa Monica · (310) 853-8972
Los Angeles County · 90402, 90403

Epoxy Flooring North of Montana, Santa Monica

Epoxy flooring North of Montana costs $6.50–$10 per sq ft for flake, or $2,600–$4,000 for a two-car garage. Metallic floors run $12.50–$18.50 per sq ft. Our shop is a few minutes away, so estimates are quick to book.

North of Montana is our home turf; the shop on Stanford Street is a few minutes south. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 5–10 minutes. Call (310) 853-8972 for a free on-site estimate.

2026 installed prices

What Does Epoxy Flooring Cost in North of Montana?

Installed prices for 2026. Two-car garage = up to 400 sq ft. Every project starts at $2,600. Extra prep is priced after a free on-site look.
SystemPer sq ftTwo-car garageTime on site
Flake epoxy (garage standard)$6.50–$10$2,600–$4,0001 day
Solid color epoxy$9.50–$11.50$3,800–$4,6003 days
Metallic epoxy$12.50–$18.50$5,000–$7,4003–4 days
Quartz / industrial broadcast$9–$16.50$3,600–$6,6002–3 days
Polyaspartic patio & outdoor coating$8–$12$3,200–$4,8001–2 days

Flake garage floor cost by size in North of Montana

Garage sizeApprox. areaFlake installed
1-car250 sq ft$2,600
2-car400 sq ft$2,600–$4,000
3-car650 sq ft$4,225–$6,500

What Makes North of Montana Floors Different?

Detached garages off the alley are the norm here. Many date to the 1930s–50s, with thin slabs and long cracks. Grinding and crack repair are standard on these.

Wilshire-Montana has more condo and duplex garages, which come with HOA paperwork and shared spaces.

Seamless solid color epoxy floor with a high-gloss topcoat, installed by Santa Monica Epoxy Flooring in North of Montana Santa Monica, CA 90402See more: Solid color epoxy ›

Why Flake Floors in North of Montana Range From $2,600 to $4,000

Detached garage: 3- or 4-layer flake. Montana Ave studio: solid or metallic.

A flake epoxy garage floor in North of Montana costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.

3-layer flake build

From $6.50 per sq ft
Two-car garage: From $2,600

  • Basecoat picked for your slab: moisture-vapor-barrier epoxy where the concrete holds moisture, or pigmented polyaspartic where sun hits the floor
  • Vinyl flake broadcast until the basecoat will not take any more
  • Clear, UV-stable polyaspartic topcoat rated for hot tires

Best for: Most garages. One day on site, walkable that night.

4-layer flake build

$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000

  • Everything in the 3-layer build
  • A second clear coat: urethane for high gloss, or polyaspartic for a matte look
  • Optional light sanding between coats so it feels smoother underfoot
  • Optional anti-slip grit in 240, 80 or 30 grit

Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.

5-layer flake build

Up to $10 per sq ft
Two-car garage: Up to $4,000

  • A clear moisture vapor barrier as its own first coat
  • Pigmented polyaspartic basecoat
  • Full flake broadcast
  • Polyaspartic topcoat
  • Final urethane gloss or matte polyaspartic coat, optional grit

Best for: Damp coastal slabs and anyone who wants the thickest build we install.

Prep: the other half of the price

In North of Montana, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.

  • Grinding off an old coating, sealer or paint
  • Removing carpet glue, tile mastic or mat adhesive
  • Advanced crack and spall repair
  • Demolishing an existing floor before coating
  • Moisture mitigation on a slab that reads damp
  • Extra labor for tight access, oil-soaked concrete or heavy cleanup

Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.

North of Montana Neighborhoods and Zip Codes We Cover

NeighborhoodZipWhat we usually find
North of Montana90402Larger homes with detached two-car garages
Wilshire-Montana90403Duplexes, condos and smaller garages
Montana Ave retail90403Boutiques and studios
San Vicente / Gillette Regent Square90402Older estates and rebuilt homes

Plus every other street in 90402, 90403. No travel charge.

Which Floor Fits a North of Montana Home or Business?

Detached garage: 3- or 4-layer flake. Montana Ave studio: solid or metallic.

Because we are close, we can often fit small jobs in quickly.

Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.

How Install Day Works

  1. Moisture test and walk-through: we read the slab and mark cracks before anything starts.
  2. Diamond grinding: opens the concrete so the coating can bite. No acid etching.
  3. Dust control: HEPA vacuums pull the grinding dust as we go.
  4. Repairs: cracks, pits and spalls filled and ground flush.
  5. Basecoat: moisture-tolerant epoxy or pigmented polyaspartic, picked for your slab.
  6. Broadcast: flake or quartz thrown until the basecoat is covered, or a metallic pour.
  7. Scrape and vacuum: loose chips come off so the surface is even.
  8. Topcoat: clear polyaspartic rated for hot tires and sun.

North of Montana Epoxy Flooring FAQ

How much does epoxy flooring cost in North of Montana?

Epoxy flooring North of Montana costs $6.50–$10 per sq ft for flake, or $2,600–$4,000 for a two-car garage. Metallic floors run $12.50–$18.50 per sq ft. Our shop is a few minutes away, so estimates are quick to book.

How fast can you get to North of Montana for an estimate?

We are a few minutes away on Stanford Street, so most estimates can be scheduled within the week.

Do older Santa Monica alley garages need extra prep?

Often, yes. Older slabs tend to have cracks and old paint. Both are handled during prep and priced after we see them.

Why does a flake epoxy garage floor range from $2,600 to $4,000?

The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.

What prep work can add to an epoxy floor quote?

Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.

Get a Real Price for Your Floor

Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.