A flake epoxy garage floor in Pacific Palisades costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. New slabs on rebuilt homes need about 28 days of cure before coating. Patio and pool deck coatings run $8–$12 per sq ft.
Pacific Palisades is about six miles up the coast from our shop. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 15–20 minutes up PCH or Sunset. Call (310) 853-8972 for a free on-site estimate.
A lot of Palisades work right now is on rebuilt homes. New concrete is the best surface we get, but it has to cure first. We usually test moisture around four weeks after the pour and coat once it is in range.
Homes that came through intact are often 1950s–70s builds with older slabs, some with a coating that is decades old. Those get ground down to clean concrete and repaired.
See more: Solid color epoxy ›| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
On a new build, owners often choose the 5-layer flake or a metallic for the garage, since it is the one time the slab is perfect. On older homes the standard 3-layer flake does the job.
A flake epoxy garage floor in Pacific Palisades costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Pacific Palisades, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| The Alphabet Streets | 90272 | Older homes with single and two-car garages |
| Huntington Palisades | 90272 | Large lots and new construction |
| Castellammare | 90272 | Steep streets above PCH, careful access planning |
| Marquez Knolls | 90272 | 1960s homes with attached two-car garages |
| Palisades Highlands | 90272 | Newer homes with larger garages |
Plus every other street in 90272. No travel charge.
On a new build, owners often choose the 5-layer flake or a metallic for the garage, since it is the one time the slab is perfect. On older homes the standard 3-layer flake does the job.
On rebuild sites we coordinate with the general contractor so we are not working next to drywall dust or painters.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
A flake epoxy garage floor in Pacific Palisades costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. New slabs on rebuilt homes need about 28 days of cure before coating. Patio and pool deck coatings run $8–$12 per sq ft.
Plan on at least 28 days. We test moisture before coating; if it is still high, the 5-layer system with a vapor barrier first coat lets us go sooner.
Yes. We schedule around the GC so the garage is coated after the messy trades are done, and we can provide data sheets for the plans.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
