Hollywood epoxy flooring runs $6.50–$10 per sq ft for flake garages ($2,600–$4,000 for two cars) and $9–$16.50 per sq ft for commercial solid or quartz floors in studios, restaurants and retail. We quote after a site visit.
Hollywood is about eleven miles east of our shop. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 30–35 minutes. Call (310) 853-8972 for a free on-site estimate.
Stage or studio: solid color epoxy. Restaurant kitchen: quartz with cove base. Hillside garage: standard flake.
A flake epoxy garage floor in Hollywood costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Hollywood, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
The Media District off Santa Monica Blvd is full of stages and post houses on old industrial slabs. Those often have paint, tape residue and patched holes from old rigging.
In the hills, garages are often carved into the slope, small and hard to reach. We carry equipment in and plan around narrow streets.
See more: Grind & seal ›| Neighborhood | Zip | What we usually find |
|---|---|---|
| Hollywood Hills | 90068 | Hillside homes with tight garages |
| Media District | 90038 | Sound stages, post houses and studios |
| Hollywood core | 90028 | Restaurants, bars and retail |
| Hollywood Dell / Beachwood | 90068 | Older homes, steep access |
Plus every other street in 90028, 90038, 90068. No travel charge.
Stage or studio: solid color epoxy. Restaurant kitchen: quartz with cove base. Hillside garage: standard flake.
Restaurants book overnight or closed-day installs.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
Hollywood epoxy flooring runs $6.50–$10 per sq ft for flake garages ($2,600–$4,000 for two cars) and $9–$16.50 per sq ft for commercial solid or quartz floors in studios, restaurants and retail. We quote after a site visit.
Yes. Kitchens get a quartz broadcast for grip and a topcoat that handles hot water and cleaners, often with a cove base at the walls.
Yes. We bring a smaller vehicle and hand-carry gear when needed.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
