In Brentwood, a flake epoxy garage floor costs $6.50–$10 per sq ft, which is $2,600–$4,000 for a two-car garage. Larger three- and four-car garages use the same per-foot rate. Metallic epoxy for gyms or wine rooms is $12.50–$18.50 per sq ft.
Brentwood is a short drive north from our shop; we are often on site within the week. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 15 minutes up 26th St. Call (310) 853-8972 for a free on-site estimate.
Brentwood garages are bigger than average, and a lot of them are already finished in some way: tile, a painted floor or an older epoxy that has started to peel at the door. Removing that is the first thing we price.
Owners here often want the garage to match the house, so we bring both flake samples and metallic boards. Home gyms and wine rooms are common second projects.
See more: Solid color epoxy ›For a show garage, a 4-layer flake with a urethane gloss topcoat looks clean and holds up. For a gym, a solid satin epoxy with fine grit gives grip under rubber mats.
A flake epoxy garage floor in Brentwood costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Brentwood, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
For a show garage, a 4-layer flake with a urethane gloss topcoat looks clean and holds up. For a gym, a solid satin epoxy with fine grit gives grip under rubber mats.
We coordinate with house managers and gate codes and keep the work inside the garage. Most jobs need one day plus cure time.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Brentwood Park | 90049 | Large estates with three- and four-car garages |
| Brentwood Glen | 90049 | 1940s–50s homes south of Sunset with two-car garages |
| Crestwood Hills | 90049 | Mid-century hillside homes, some with tight garages |
| Mandeville Canyon | 90049 | Long driveways and detached garages, deliveries planned in advance |
| Kenter Canyon | 90049 | Hillside lots where we carry gear up steps |
Plus every other street in 90049. No travel charge.
In Brentwood, a flake epoxy garage floor costs $6.50–$10 per sq ft, which is $2,600–$4,000 for a two-car garage. Larger three- and four-car garages use the same per-foot rate. Metallic epoxy for gyms or wine rooms is $12.50–$18.50 per sq ft.
Yes. Failing coatings are diamond-ground off before the new system goes down. It is priced as coating removal, and it is often why one quote is higher than another.
Yes. Gyms usually get a solid satin epoxy with grit; wine rooms often get metallic. Both are priced per square foot after we measure.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
