A flake epoxy garage floor in Marina del Rey costs $6.50–$10 per sq ft, which is $2,600–$4,000 for a two-car garage up to 400 sq ft. Single-car townhome garages still start at the $2,600 project minimum. Install is one day; parking after 48–72 hours.
Marina del Rey is about four miles from our Stanford Street shop, straight down Lincoln Boulevard. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 15 minutes. Call (310) 853-8972 for a free on-site estimate.
Most homes in Marina del Rey are condos and townhomes, and that changes the job more than the slab does. HOAs usually want proof of insurance, a set work window and a plan for fumes. We use low-odor polyaspartic topcoats and keep the door cracked with fans running.
Garages on the Peninsula and Silver Strand sit close to sea level. We have seen white efflorescence on a lot of these slabs, which is a sign moisture is coming through. That slab needs a vapor barrier coat first.
See more: Polyaspartic & outdoor ›| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Marina Peninsula | 90292 | Narrow lots and tuck-under garages a block from the sand |
| Silver Strand | 90292 | Older beach homes with damp, cracked garage slabs |
| Admiralty Way condos | 90292 | Shared and private garages managed by HOAs |
| Mariners Village area | 90292 | Townhome garages with tight door openings |
Plus every other street in 90292. No travel charge.
For a townhome garage with a storage loft and one car, a light gray flake keeps the room bright. For a shared garage where neighbors drive across your space, add the 4-layer topcoat for wear.
A flake epoxy garage floor in Marina del Rey costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Marina del Rey, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
For a townhome garage with a storage loft and one car, a light gray flake keeps the room bright. For a shared garage where neighbors drive across your space, add the 4-layer topcoat for wear.
Send us your HOA rules before the estimate. We can usually fit the install into one weekday and be out before evening traffic.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
A flake epoxy garage floor in Marina del Rey costs $6.50–$10 per sq ft, which is $2,600–$4,000 for a two-car garage up to 400 sq ft. Single-car townhome garages still start at the $2,600 project minimum. Install is one day; parking after 48–72 hours.
Yes. We provide a certificate of insurance, product data sheets and a one-day work plan for the board. Most approvals are routine once they see the topcoat is low-odor.
White powder is usually efflorescence, salts left behind by moisture moving through the slab. It can be coated, but it needs a moisture vapor barrier basecoat. That is what the 5-layer system is for.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
