A flake epoxy garage floor in Playa Vista costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage. Playa Vista garages are newer, so prep is usually light and most jobs land at the lower end. Installation takes one day.
Playa Vista is about five miles from our shop, just past Marina del Rey. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 15–20 minutes. Call (310) 853-8972 for a free on-site estimate.
Most owners pick a gray or blue-gray flake that matches the community look. HOAs sometimes restrict colors visible from the street.
A flake epoxy garage floor in Playa Vista costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Playa Vista, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Playa Vista slabs are mostly 2000s and newer. They are smooth and hard, which is good, but a hard-troweled slab still needs diamond grinding or the coating will not grip.
Tandem garages are common here. They are long and narrow, so we measure carefully; the square footage is often bigger than people expect.
See more: Commercial epoxy ›| Neighborhood | Zip | What we usually find |
|---|---|---|
| Phase I townhomes | 90094 | 2000s-era townhome garages, tandem layouts |
| Phase II (The Campus area) | 90094 | Newer homes with clean slabs |
| Runway area condos | 90094 | Shared garages under HOA rules |
| Ballona edge homes | 90094 | Lower ground, occasional moisture |
Plus every other street in 90094. No travel charge.
Most owners pick a gray or blue-gray flake that matches the community look. HOAs sometimes restrict colors visible from the street.
We send the HOA our insurance certificate and product sheets ahead of time and book one weekday.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
A flake epoxy garage floor in Playa Vista costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage. Playa Vista garages are newer, so prep is usually light and most jobs land at the lower end. Installation takes one day.
Yes. New slabs are often too smooth for a coating to grip. Grinding is fast on new concrete, which helps keep the price near the low end.
Per square foot. A tandem two-car is often 400–500 sq ft, so a flake floor runs about $2,600–$5,000.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
