Epoxy flooring in Calabasas costs $6.50–$10 per sq ft for flake ($2,600–$4,000 for two cars) and $12.50–$18.50 per sq ft for metallic. Gated-community garages are often three cars and priced per measured square foot.
Calabasas is at the edge of our area, about seventeen miles away. No travel charge. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 35–40 minutes via the 101 or Malibu Canyon. Call (310) 853-8972 for a free on-site estimate.
Calabasas garages are large and usually clean. That means prep is lighter, and the money goes into the finish: metallic and 4-layer flake are both common.
Gate access is planned in advance. We send the vehicle and crew info so the guard has it the morning of the job.
See more: Polyaspartic & outdoor ›| System | Per sq ft | Two-car garage | Time on site |
|---|---|---|---|
| Flake epoxy (garage standard) | $6.50–$10 | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 | 3–4 days |
| Quartz / industrial broadcast | $9–$16.50 | $3,600–$6,600 | 2–3 days |
| Polyaspartic patio & outdoor coating | $8–$12 | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Show garage: metallic or 4-layer flake with urethane gloss. Barn or shop: quartz broadcast.
A flake epoxy garage floor in Calabasas costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.
From $6.50 per sq ft
Two-car garage: From $2,600
Best for: Most garages. One day on site, walkable that night.
$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000
Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.
Up to $10 per sq ft
Two-car garage: Up to $4,000
Best for: Damp coastal slabs and anyone who wants the thickest build we install.
In Calabasas, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.
Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| The Oaks | 91302 | Gated estates, three- and four-car garages |
| Calabasas Park | 91302 | Large homes, golf-course lots |
| Mont Calabasas | 91302 | Newer homes with clean slabs |
| Old Topanga / Mulholland | 91302 | Rural lots with shops and barns |
Plus every other street in 91302. No travel charge.
Show garage: metallic or 4-layer flake with urethane gloss. Barn or shop: quartz broadcast.
Metallic takes 3–4 days, so we book it so the garage is clear for that stretch.
Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.
Epoxy flooring in Calabasas costs $6.50–$10 per sq ft for flake ($2,600–$4,000 for two cars) and $12.50–$18.50 per sq ft for metallic. Gated-community garages are often three cars and priced per measured square foot.
Yes. Send us the gate procedure and we will register the crew and vehicles ahead of time.
Three to four days, because each layer has to cure. Park on it about three days after the last coat.
The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.
Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.
Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.
