Now open: 1653 Stanford St #1, Santa Monica · (310) 853-8972
Los Angeles County · 90293

Epoxy Flooring Playa del Rey, CA

In Playa del Rey, a flake epoxy garage floor costs $6.50–$10 per sq ft, which is $2,600–$4,000 for two cars. Beach-adjacent slabs often need the 5-layer build with a vapor barrier, which is the top of that range.

Playa del Rey is about six miles south of the shop, just past the marina channel. Drive from our new shop at 1653 Stanford St #1, Santa Monica: about 20 minutes. Call (310) 853-8972 for a free on-site estimate.

What Makes Playa del Rey Floors Different?

The bluffs and beach streets are very different jobs. Down by the sand, slabs stay damp and show efflorescence; up on the bluff, slabs are drier but driveways are steep and parking is limited.

We moisture-test every slab here. If readings are high we will tell you, and recommend the vapor barrier build rather than sell a floor that lifts.

Diamond-ground and sealed concrete floor with a clear gloss finish, installed by Santa Monica Epoxy Flooring in Playa del Rey, CA 90293See more: Grind & seal ›
2026 installed prices

What Does Epoxy Flooring Cost in Playa del Rey?

Installed prices for 2026. Two-car garage = up to 400 sq ft. Every project starts at $2,600. Extra prep is priced after a free on-site look.
SystemPer sq ftTwo-car garageTime on site
Flake epoxy (garage standard)$6.50–$10$2,600–$4,0001 day
Solid color epoxy$9.50–$11.50$3,800–$4,6003 days
Metallic epoxy$12.50–$18.50$5,000–$7,4003–4 days
Quartz / industrial broadcast$9–$16.50$3,600–$6,6002–3 days
Polyaspartic patio & outdoor coating$8–$12$3,200–$4,8001–2 days

Flake garage floor cost by size in Playa del Rey

Garage sizeApprox. areaFlake installed
1-car250 sq ft$2,600
2-car400 sq ft$2,600–$4,000
3-car650 sq ft$4,225–$6,500

Why Flake Floors in Playa del Rey Range From $2,600 to $4,000

Beach streets: 5-layer flake. Bluff homes: standard or 4-layer flake.

A flake epoxy garage floor in Playa del Rey costs $6.50–$10 per sq ft, or $2,600–$4,000 for a two-car garage up to 400 sq ft. A 3-layer floor sits at the low end, a 4-layer double-topcoat floor in the middle, and a 5-layer floor with its own moisture barrier at the top.

3-layer flake build

From $6.50 per sq ft
Two-car garage: From $2,600

  • Basecoat picked for your slab: moisture-vapor-barrier epoxy where the concrete holds moisture, or pigmented polyaspartic where sun hits the floor
  • Vinyl flake broadcast until the basecoat will not take any more
  • Clear, UV-stable polyaspartic topcoat rated for hot tires

Best for: Most garages. One day on site, walkable that night.

4-layer flake build

$6.50–$10 per sq ft
Two-car garage: $2,600–$4,000

  • Everything in the 3-layer build
  • A second clear coat: urethane for high gloss, or polyaspartic for a matte look
  • Optional light sanding between coats so it feels smoother underfoot
  • Optional anti-slip grit in 240, 80 or 30 grit

Best for: Owners who want a smoother surface, a set sheen, or more grip near the door.

5-layer flake build

Up to $10 per sq ft
Two-car garage: Up to $4,000

  • A clear moisture vapor barrier as its own first coat
  • Pigmented polyaspartic basecoat
  • Full flake broadcast
  • Polyaspartic topcoat
  • Final urethane gloss or matte polyaspartic coat, optional grit

Best for: Damp coastal slabs and anyone who wants the thickest build we install.

Prep: the other half of the price

In Playa del Rey, the slab often decides where you land in that range. We price these after we see the slab, so a bare, sound floor is quoted at the low end and you only pay for prep you actually need.

  • Grinding off an old coating, sealer or paint
  • Removing carpet glue, tile mastic or mat adhesive
  • Advanced crack and spall repair
  • Demolishing an existing floor before coating
  • Moisture mitigation on a slab that reads damp
  • Extra labor for tight access, oil-soaked concrete or heavy cleanup

Every tier is a full diamond-ground floor. The extra money in the 4- and 5-layer builds buys coats, not markup.

Which Floor Fits a Playa del Rey Home or Business?

Beach streets: 5-layer flake. Bluff homes: standard or 4-layer flake.

Narrow streets in The Jungle mean we arrive early to get parking for the van.

Before you collect quotes: 2026 garage floor cost guide · epoxy vs polyaspartic · why floors peel.

Playa del Rey Neighborhoods and Zip Codes We Cover

NeighborhoodZipWhat we usually find
The Jungle90293Small lots and tight garages near the beach
Playa del Rey bluffs90293Homes on the bluff with steep driveways
Vista del Mar90293Beachfront homes with damp slabs
Westchester edge90045Larger ranch homes inland

Plus every other street in 90293. No travel charge.

How Install Day Works

  1. Moisture test and walk-through: we read the slab and mark cracks before anything starts.
  2. Diamond grinding: opens the concrete so the coating can bite. No acid etching.
  3. Dust control: HEPA vacuums pull the grinding dust as we go.
  4. Repairs: cracks, pits and spalls filled and ground flush.
  5. Basecoat: moisture-tolerant epoxy or pigmented polyaspartic, picked for your slab.
  6. Broadcast: flake or quartz thrown until the basecoat is covered, or a metallic pour.
  7. Scrape and vacuum: loose chips come off so the surface is even.
  8. Topcoat: clear polyaspartic rated for hot tires and sun.

Playa del Rey Epoxy Flooring FAQ

How much does epoxy flooring cost in Playa del Rey?

In Playa del Rey, a flake epoxy garage floor costs $6.50–$10 per sq ft, which is $2,600–$4,000 for two cars. Beach-adjacent slabs often need the 5-layer build with a vapor barrier, which is the top of that range.

Why do some Playa del Rey garage floors peel?

Moisture. Beach slabs push vapor up through the concrete, and a coating without a vapor barrier lets go. Testing first avoids that.

Do you serve Westchester too?

Yes. Westchester (90045) is next door and inside our standard service area.

Why does a flake epoxy garage floor range from $2,600 to $4,000?

The spread comes from layer count. A 3-layer flake system starts at $6.50 per sq ft, or $2,600 for a two-car garage up to 400 sq ft. A 4-layer build adds a second topcoat, and a 5-layer build adds its own moisture barrier plus a final coat, which takes the price up to $10 per sq ft, or $4,000. The $2,600 floor is a complete system, not a teaser.

What prep work can add to an epoxy floor quote?

Prep is the other half of the price. Grinding off an old coating or paint, removing carpet or tile glue, advanced crack and spall repair, tearing out an existing floor, moisture mitigation on a damp slab, and extra labor for tight access or heavy cleanup all add time and material. We price these after seeing the slab, so a bare, sound slab is quoted at the low end.

Get a Real Price for Your Floor

Free on-site estimate from our new shop at 1653 Stanford St #1, Santa Monica.